 |
|
|
|
|
REMACOAT stands for highly-reactive 2-component spray coatings based on polyurea. Application is undertaken with 2K-high pressure airless injection machines. In combination with appropriate primers, REMACOAT is suitable for the coating of steel, concrete, light metal, plastics and many other materials. REMACOAT is insensitive to moisture, cures even at very low temperatures and is relatively insensitive to ambient conditions. REMACOAT material is available in hardnesses of from 60 shore A to 50 shore D, and can be used as a multifunctional surface protection, e.g. for component sealing, corrosion protective coatings, protection against sticking and wear. The layer thickness can be varied and is applied as a single layer of 1.5 mm to 25 mm thickness and more, according to the application. |
 |
|
Product |
Hardness |
Application / Properties |
Product-
information |
|
REMACOAT PR 100 |
- |
The Primer REMACOAT PR 100 optimizes the adhesion to concrete and C-steel areas. It is used for coatings based on 2K-component-polyurethane or polyurea-systems. |
|
|
REMACOAT A-60 |
60 ± 5
Shore A |
Due to its high elasticity, the coating system REMACOAT A-60 is ideal for durably bridging cracks, and therefore prevents the ingression of moisture or aggressive media into the substrate. Furthermore the coating system with the product name REMACOAT A-60 has an especially high resistance to wet wear, friction wear and to impact wear under certain circumstances. |
|
|
REMACOAT A-80 |
90 ± 5
Shore A |
REMACOAT A-80 has a successful track record in a variety of applications that require wear protection. However, because of its favorable elastic properties it is an excellent solution for components under dynamic stress as well as crack bridging applications. |
|
|
REMACOAT D-40 |
45 ± 5
Shore D |
REMACOAT D-40 has been approved by the German Institute for Construction Engineering (DIBt: Z-59.12-305) as an organic surface protection for concrete in storage, filling and handling facilities which are subject to the German Water Ecology Act (WHG 19 I). |
|
|
REMACOAT D-40-S |
45 ± 5
Shore D |
REMACOAT D-40 S has a longer gel time feature. This gives the product better self leveling properties and results in a uniform thickness and a more cosmetically pleasing appearance. REMACOAT D-40 S is perfect for industrial floors subject to mechanical and chemical forces. |
|
|
REMACOAT C |
30 ± 5
Shore D |
REMACOAT C is suitable for making antistatic coatings to prevent the threat of ignition from electrostatic charges. These properties are especially important in the storage of flammable liquids of A I, A II and B hazard classes.
DIBt: Z-59.12-304 |
|
|
REMACOAT FDA |
45 ± 5
Shore D |
REMACOAT FDA has been tested according to EC Directive 2002/72/EC and the Consumer Goods Regulations for Foodstuffs and given approval release for use in contact with dry foods. |
|
|
REMACOAT FR |
50 ± 5
Shore D |
The special formulation of REMACOAT FR enables it to fulfil the requirements of ÖNORM B 3800 Parts 1 and 2 for flame retardant B1, drop formation Tr1 and smoke intensity Q1. |
|
|
|
|
|
|
|
